Quote:
Originally Posted by Pellseinydd
Quote:
Originally Posted by dagskarlsen
The dial has some shorting contacts shorting out the circuit, so you should only hear a click when the dial is moved out of rest position, and one when it is coming to the rest position. The diode bridge may fit in the phone across the wires going to the receiver.
The diode bridge will fit between the 2 terminals inside the ring.
dsk
|
Receiver is across Terminals 5 and 8. Not T 4 and T 5 |
On mine (picture with yellow ring) and the yellowish diagram is from mine, has the receiver on terminals 5 and 6 so it has obviously been at least 2 versions.
dsk