Re: Does anyone have an 'internal' wiring diagram for this Xpelair extractor fan?
Hello, everyone,
Thank you for your great answers and I apologise for my time in replying.
I managed to get it working and it works very well. I will show you how it's wired with the help of some photos. The wiring is explained in text, if you can't see the photos properly.
The wiring up of the fan in the photos is only a test, of course.
The wiring:
The black wire from the mains lead, the blue wire from the motor and the blue wire from the board all connect to one side of a white connector.
The red wire from the mains lead and the red wire from the board fit into one side of the switch.
The white wire form the board fits into the other side of the switch.
The brown wire from the motor fits into the connector on the board marked ''F''.
Thank you all again.
Francis
|