Quote:
Originally Posted by DMcMahon
While trying to find the missing cover screw found a diode on the main board with one end not connected, on the board layout it looks like D13 but not yet seen it on the schematic.
|
The copy schematic I have is what I would call poor but so far as I can make out D13 is connected back to back (anodes) with D12, their cathodes being connect to two switches and the diode outputs from the reverse sensor receiver light detectors, the diode is shown on an imaginary line drawn upwards from F10 in the component location strip at the bottom of the schematic.
Lawrence.