View Single Post
Old 6th May 2019, 5:08 pm   #22
Join Date: Jan 2006
Location: Todmorden, West Yorkshire, UK.
Posts: 590
Default Re: Tape Speed Control Stuck on UHER 4000 Report IC.

It looks like you just need a normal reasonably long screwdriver to undo the screw which is attached to the front panel and then remove the tag which is holding the speed-change shaft down. You then need to reattach the dangling spring to the hook which projects from the hinge of the circuit board.
If you need to undo the screw at the other end of the speed-change lever be very careful as it is holding down a spring. You would also need to undo the two screws holding the motor in place and move it aside.
Attached Thumbnails
Click image for larger version

Name:	IMG_8791.JPG
Views:	20
Size:	119.4 KB
ID:	182571   Click image for larger version

Name:	IMG_8794.JPG
Views:	19
Size:	96.0 KB
ID:	182572  
barretter is offline