Thread: 1.5Volt supply
View Single Post
Old 29th Apr 2019, 12:10 pm   #5
Herald1360
Dekatron
 
Herald1360's Avatar
 
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 13,697
Default Re: 1.5Volt supply

Presumably the current draw issue is as relevant to the USB source capability as the LM317? Without a heatsink, a TO220 317 should be OK for about 300mA for 5V in and 1.5V out.

Edit: Looking at the likely module, it should be OK for about an amp with the 3.5V I/O differential. I would think for 1.5A it would need the I/O differential kept very close to the 317 dropout value!
__________________
....__________
....|____||__|__\_____
.=.| _---\__|__|_---_|.
.........O..Chris....O

Last edited by Herald1360; 29th Apr 2019 at 12:19 pm.
Herald1360 is offline