Quote:
Originally Posted by Alan's MagicEye
Hello Wendy
Thanks, I have tried this too with "catalogue page" printed matter and acetone, I confirm that it didn't produce a usable result either. I use the laser print/ hot iron/ ferric chloride method and find it reliable.
It would be good to know if anyone has had success and with which specific combination of materials.
Alan
|
I forgot to detail the transfer medium in my last post, I use glossy photo paper to carry the toner to the board and iron this on thoroughly for about 3-4 minutes and dissolve the paper off in warm water to reveal the toner mask, I touch in any areas of missing toner with an indelible marker pen. I think this is a fairly standard method so I'm probably not saying anything new here
Alan