Re: Revox A77 Stops Playing (Transport Fault)
I use clip ins and glue them to the board , no problems so far.
2200uF 50v is the modern equivalent I`m using . Vishay are the brand I`m using I think .
You can use a 3300uF 35v if you want to go up rather than down but the 2200`s are close enough and work just fine . You can go to around double the capacitance of a electrolytic before problems start occurring but you dont want to go too far under .
Last edited by NorfolkDaveUK; 18th Nov 2018 at 12:27 am.
|