Meter set to 2k
0V taken from ground screw
+5v taken from pin24 of UD9
Code:
OV +5V
DA0 0.502 0.403
DA1 0.502 0.409
DA2 Varied 0.2
DA3 0.508 0.412
DA4 0.511 0.413
DA5 0.523 0.413
DA6 0.509 0.412
DA7 0.508 0.410
DA2 went all over the place on the 0V check from 0 to 0.45 to 0.508 - I could not get a steady reading from it.
Colin.
Quote:
Originally Posted by SiriusHardware
With the machine set up the way it is, (NOP test still in place, but everything else still connected as it should be) could you please, with power off, measure the resistances of the DA0 to DA7 lines to 0V and to +5V?
|