UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

The Philpott · 18th May 2019, 10:50 pm

Quite so; the PVC and polystyrene problem is potentially very dangerous. There are inter-reactions between PVC and ABS also. A PVC cable routed around an ABS moulding can leave quite a deep 'melted' mark into it.

Dave

18th May 2019, 10:50 pm	#8
The Philpott Dekatron Join Date: Aug 2016 Location: Colchester, Essex, UK. Posts: 4,106	Re: Cable that 'melts' paint in storage Quite so; the PVC and polystyrene problem is potentially very dangerous. There are inter-reactions between PVC and ABS also. A PVC cable routed around an ABS moulding can leave quite a deep 'melted' mark into it. Dave