UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

sentinel040 · 3rd Dec 2013, 9:52 pm

Many thanks for the kind offer Lucien.

In the meantime I have as carefully as possible decided to carry out an investigation of the resistances. Prompted by the fact that that there appeared to be just steel discs separated by thinner discs I pulled one apart and indeed there are three solid discs separated by "Metrosil" discs, bearing the part number 912/306. A pic is included.

By the way looking at the photograph on the website there seem to be some minor engine layout differences, in that the air cleaner on this one is adjacent to the cooler group (radiator) and the fuel tank sits above the main alternator.

Regards

Ian

3rd Dec 2013, 9:52 pm	#5
sentinel040 Hexode Join Date: Feb 2007 Location: Near Lichfield, Staffordshire, UK, most of the time and Crystal Palace, S London, some of the time.. Posts: 330	Re: Tonum regulator Many thanks for the kind offer Lucien. In the meantime I have as carefully as possible decided to carry out an investigation of the resistances. Prompted by the fact that that there appeared to be just steel discs separated by thinner discs I pulled one apart and indeed there are three solid discs separated by "Metrosil" discs, bearing the part number 912/306. A pic is included. By the way looking at the photograph on the website there seem to be some minor engine layout differences, in that the air cleaner on this one is adjacent to the cooler group (radiator) and the fuel tank sits above the main alternator. Regards Ian Attached Thumbnails