View Single Post
Old 26th Oct 2020, 9:20 pm   #28
MeanDumpsterCat
Pentode
 
MeanDumpsterCat's Avatar
 
Join Date: Oct 2014
Location: Selsey, West Sussex, UK.
Posts: 204
Default Re: Ferrograph Quiet Crackly Audio

That would make sense. Which sockets and switches would I be looking at exactly? As far as I can see the only sockets that are connected to the oscillator are SK8 and SK9 which are used to enable or disable erase / bias.

I checked these earlier. One of them isnt in the best shape but I tested them for continuity and its fine despite appearance. I did also try swapping them but no change. I'll go back and double check them anyway.
MeanDumpsterCat is offline