UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

ribbonmicsrus · 14th Nov 2019, 6:41 pm

Martin

I think it is a standard fuse, my terminology was QB. The ones I acquired from RS were either anti surge (T) or normal (F), the type I am using. These were the only types listed.

I assume the LR8 regulator would be OK with around 45uF decoupling on its output when I have finished building or would you say not necessary or something like 1-4.7uF instead on each switch. I would imagine only effect would be to put the device into current limit for a short period.

Andy

14th Nov 2019, 6:41 pm	#1538
ribbonmicsrus Pentode Join Date: Jun 2013 Location: Worthing, West Sussex, UK. Posts: 223	Re: The "Sussex" Homebrew Valve Tester. Martin I think it is a standard fuse, my terminology was QB. The ones I acquired from RS were either anti surge (T) or normal (F), the type I am using. These were the only types listed. I assume the LR8 regulator would be OK with around 45uF decoupling on its output when I have finished building or would you say not necessary or something like 1-4.7uF instead on each switch. I would imagine only effect would be to put the device into current limit for a short period. Andy