UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

See_Mos · 11th Jan 2019, 5:26 pm

One of my favorite sets.

The valve holders are indeed paxolin ones.

Just to help Ron, valve pins are counted, looking underneath, clockwise from the spigot.

On the Pye 15A pin 2 is connected to the chassis. Pin 7 is connected to each valve by a black wire and at the EBL31 there is a thick wire from the transformer.

I may be able to help if you get stuck for an EBL31

11th Jan 2019, 5:26 pm	#6
See_Mos Hexode Join Date: Nov 2003 Location: Ossett, West Yorkshire, UK. Posts: 483	Re: PYE 15A valve question One of my favorite sets. The valve holders are indeed paxolin ones. Just to help Ron, valve pins are counted, looking underneath, clockwise from the spigot. On the Pye 15A pin 2 is connected to the chassis. Pin 7 is connected to each valve by a black wire and at the EBL31 there is a thick wire from the transformer. I may be able to help if you get stuck for an EBL31