View Single Post
Old 10th Nov 2021, 7:53 pm   #124
SiriusHardware
Dekatron
 
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 11,482
Default Re: MK14 Programming Interface

Brilliant, that didn't take you very long!

I don't know anything at all about the little micro board you've used, do you have the PC and the unit connected together via a direct ad-hoc connection, or are they both on the same local network, or is the 'control panel' actually a web page that you go to on the internet?

Edit: I've just run through your post again, so...

At home you connect it to your normal wifi network and it's a local 'web page' which you can navigate to much like the control panel on your router, this means you can keep your usual wifi settings and navigate around the rest of your network and onto the internet...

But- when you are away off site you can make it look like an access point to which you can connect instead?

Last edited by SiriusHardware; 10th Nov 2021 at 8:05 pm.
SiriusHardware is online now