UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Bazz4CQJ · 27th Jun 2021, 5:17 pm

The meter should be an RF level meter, but it seems apparent now that they were fitted, but they were never connected!

So, the pics show there's a double valve in there and single valve, and the layout looks like it will be relatively easy to figure out the circuit.

The previous owner has obviously replaced the old selenium bridge rectifier and put in a (single) silicon diode, and replaced the big electrolytics.

B

overlapping posts with Wrangler

At the least the black Hunt's capacitor has been replaced, so that's good work on somebody's part!

27th Jun 2021, 5:17 pm	#42
Bazz4CQJ Dekatron Join Date: Apr 2009 Location: Oxfordshire, UK. Posts: 4,935	Re: Signal generators The meter should be an RF level meter, but it seems apparent now that they were fitted, but they were never connected! So, the pics show there's a double valve in there and single valve, and the layout looks like it will be relatively easy to figure out the circuit. The previous owner has obviously replaced the old selenium bridge rectifier and put in a (single) silicon diode, and replaced the big electrolytics. B overlapping posts with Wrangler At the least the black Hunt's capacitor has been replaced, so that's good work on somebody's part! __________________ Saturn V had 6 million pounds of fuel. It would take thirty thousand strong men to lift it an inch. Last edited by Bazz4CQJ; 27th Jun 2021 at 5:25 pm.