View Single Post
Old 11th Sep 2019, 11:22 am   #36
crackle
Dekatron
 
crackle's Avatar
 
Join Date: Mar 2011
Location: Basildon, Essex, UK.
Posts: 3,885
Default Re: Kolster-Brandes MR10

I have taken a photo of the underside of the chassis of my radio.
Click image for larger version

Name:	KB_MR10-2_V2.jpg
Views:	88
Size:	131.8 KB
ID:	189961
If the resistor you have arrowed as R39 is the brown green brown then I believe it is R29. The 10k resistor behind this area is odd, I cant find it on the schematic at all.

Here is a photo of the whole under chassis showing the components.

By the way I found it much easier fitting the chassis back in the cabinet if the cabinet is laid down on its front. I replaced the hex head bolts with philips type screws, I believe they are 2BA, a blob of wax or bluetac on the screw head helps hold it on the screw driver.

Mike
__________________
BVWS Member, 2E1MJE
The KB Museum

My collection in the Radio Museum

Last edited by crackle; 11th Sep 2019 at 11:45 am.
crackle is offline