UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

bigus01 · 16th Nov 2017, 2:46 pm

I have already cleaned contacts which give a good reading with meter. Should these contacts do the same job as the wire link? See previous post. I have also tested continuity off all 5 cables, which are fine. All I can get is the sound of my own voice in the receiver, no sound transmitted. Think I'm nearing the point of putting everything back to original and accepting it.
Regards

16th Nov 2017, 2:46 pm	#72
bigus01 Retired Dormant Member Join Date: Nov 2017 Location: West Yorkshire, UK. Posts: 38	Re: GPO 332 transmitter issue I have already cleaned contacts which give a good reading with meter. Should these contacts do the same job as the wire link? See previous post. I have also tested continuity off all 5 cables, which are fine. All I can get is the sound of my own voice in the receiver, no sound transmitted. Think I'm nearing the point of putting everything back to original and accepting it. Regards Last edited by bigus01; 16th Nov 2017 at 3:02 pm.