UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

11th Oct 2018, 5:23 pm

Grind off the remaining bit of the grubscrew in the shaft hole, fill knob with epoxy, drill in a new place and re-tap using a helicoil if to hand.

11th Oct 2018, 5:23 pm	#5
Guest Guest Posts: n/a	Re: A little A104 problem... Grind off the remaining bit of the grubscrew in the shaft hole, fill knob with epoxy, drill in a new place and re-tap using a helicoil if to hand.