View Single Post
Old 12th Jul 2021, 7:51 pm   #7
G6Tanuki's Avatar
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 11,067
Default Re: Paint to refresh engraved markings...

In the past I've re-done these things by using a needle to dig-out all the old paint then spraying the panel with an acrylic-type rattle-can.

Let the paint dry really-hard [a few days] then go over the whole thing with 3200 Wet&Dry paper, which will remove the paint from everywhere except the engravings.

After that, a clearcoat with suitably-compatible lacquer.
G6Tanuki is offline