[CHRIS_F]

I was looking at the service manual and it says C516 should be 47uf 10 v but on my board C156 is a 4.7uf 50 v what is more likely someone putting the wrong part in on the production line or the parts list being wrong even a previous repairer being wrong? It also says in the manual that C514 L & R should be present but they are not on my circuit board not even printed where they should be, I wanted to replace all the electrolytic capacitors but unsure what to do in this case, normally I don't think I'd replace all of the capacitors, but as there was a lot of damage on this board, I think it's best to replace them.