Thread: Teac 32-2B
View Single Post
Old 9th Aug 2019, 7:01 pm   #2
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Re: Teac 32-2B

All sorted.

The problem was that 24V seemed to be going to the speed change switch and pinch control but nothing was coming back. It turned out that the connector to the servo PCB was the problem, the contacts inside it had broken.

I fitted a new connector and it worked.
__________________
Forum Moderator

http://www.michaelmauricerepairs.co.uk/
Michael Maurice is offline