Re: Aiwa NSX-AV75
Ok here's my photos.
These illustrate me putting the TWO belts on. To the left, i've always stuck to putting the belt on the lower of the two motor pulleys. To the right, i've always stuck to putting the belt on the upper of the two motor pulleys. I've highlighted where both belts wrap around each pulley. The last two pictures show the two possible "kinks" i can choose from when installing the right hand side belt. I've tried spinning the pulleys and inevitably the right hand side belt always slips from the upper groove to the lower groove on pulley #3, and then it starts pulling off the motor pulley. This just doesn't seem right to me!?
|