Quote:
Originally Posted by stevehertz
Quote:
Originally Posted by Amtec123
Regarding using video tapes on systems they were not designed for.
It should be remembered that the rf drive level should be set to saturate the magnetic tape, not the head. Depending on the format this is likely to be different in each case. Therefore to achieve optimum performance the record drive should match the tape, sufficiently greater drive levels may not be available for later high coercivity tapes.
|
Point taken but I've never experienced a problem using latest/last generation VHS tape in Betamax, V2000 (both generations), and Philips 1700 machines. In fact, as I've already mentioned, the results were superb, verging on (to the eye) off-air quality. |
Hi Steve,
How did you solve the problem with the metallic stop-stripe?
Folks, please watch this video, see the stripe at 24.22 min:
https://www.youtube.com/watch?v=2gbeMvWNxYA
How do you glue tapes?
B.t.w., see now what is all recorded on old VCR-cassettes:
https://www.youtube.com/watch?v=DFCJpEjgJvs
Regards,
German Dalek
