View Single Post
Old 28th Jun 2020, 4:41 pm   #12
AndyWright
Tetrode
 
Join Date: Feb 2012
Location: Bishop Auckland, County Durham, UK.
Posts: 91
Default Re: Labgear Topbander

I've finally got the tx up and running. Can anyone with the MK2 version comment on how much output power they are getting. Into a 50 ohm load I get just under 5 watts. PA anode current is about 35mA dipped in the CW position.

I cannot get more than 1mA of grid current even with the drive pot on max, though the manual says I should be able to get at least 2.5mA

I have peaked L3 for max grid current.

Cheers

Andy
AndyWright is offline