UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

GeoffK · 1st Mar 2019, 10:03 am

The schematics and component diagram I have for this radio show on the component layout sheet 4 the trimmers in the right place on the main tuner body, but if the tags at the side are for the trimmer next to it the numbering appears to be wrong. C3 is labelled C4 and visa versa, or am I mistaken in this? The schematic is correct showing C1,C3 going to S2a then via switch L3, L1 aerial coils, but the component layout has C3 side tag going to L6 the oscillator coil and S2d.

1st Mar 2019, 10:03 am	#33
GeoffK Heptode Join Date: Mar 2016 Location: Essex, UK. Posts: 602	Re: Ge to silicon osc replacement AF117 The schematics and component diagram I have for this radio show on the component layout sheet 4 the trimmers in the right place on the main tuner body, but if the tags at the side are for the trimmer next to it the numbering appears to be wrong. C3 is labelled C4 and visa versa, or am I mistaken in this? The schematic is correct showing C1,C3 going to S2a then via switch L3, L1 aerial coils, but the component layout has C3 side tag going to L6 the oscillator coil and S2d. Attached Thumbnails __________________ *Geoff*