Hmm, there's something I don't get at ALL about the schematic and the voltages they show at the PCL84 pins.
For example Vg2= 145V, but this SHOULD equal the b+ voltage rail, as there is no dropping resistors as with EF80 in the image IF section.
As mentioned by PortugalTV, my b+ voltage rail is low, due to the selenium rectifier (maybe).
So why do they write 145V on the schematic, when it should be 180V? I don't get it.
Also according to
https://frank.pocnet.net/sheets/030/p/PCL84.pdf there is no data for Vg2 below 170V. I'm really confused now.
Is the low (out of range) Vg2 the reason why Va equals the b+ voltage?