UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

PJL · 17th Jan 2012, 9:34 am

Hi Graham, I only have trader 1147 and the tag strip layout is very different so I'll leave it to you to check for circuit errors.

The UL41 has almost certainly suffered melt down and the heater has shorted. I looked at the other voltages and one of the UF41 had no anode voltage but it is possible this is the RF amp and switched on SW. No sign of local oscillation as the triode grid is zero.

17th Jan 2012, 9:34 am	#79
PJL Dekatron Join Date: Sep 2005 Location: Seaford, East Sussex, UK. Posts: 5,997	Re: Bush AC34, no sound. Hi Graham, I only have trader 1147 and the tag strip layout is very different so I'll leave it to you to check for circuit errors. The UL41 has almost certainly suffered melt down and the heater has shorted. I looked at the other voltages and one of the UF41 had no anode voltage but it is possible this is the RF amp and switched on SW. No sign of local oscillation as the triode grid is zero.