UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Station X · 17th Jan 2012, 12:32 am

The resistor is almost certainly R20 which is rated at 2W. However the tag strip layout drawing for the AC34 shows that the adjacent capacitor is C29 which is 50nF.

The resistor connected between pins 4 and 6 of the UL41 will be the grid stopper R17 47K. If the green wire is on the right tag it should go to R16 and C33 at the other end of the tag strip.

17th Jan 2012, 12:32 am	#78
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,286	Re: Bush AC34, no sound. The resistor is almost certainly R20 which is rated at 2W. However the tag strip layout drawing for the AC34 shows that the adjacent capacitor is C29 which is 50nF. The resistor connected between pins 4 and 6 of the UL41 will be the grid stopper R17 47K. If the green wire is on the right tag it should go to R16 and C33 at the other end of the tag strip. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.