Re: Kenwood ts50
can any of you learned gents that are (very) familiar with the TS50 tell me if D2 (led) on PLL board is supposed to stay illuminated, mine comes on at switch on then off within 0.5sec, i was wondering if this is a PLL lock lamp, if PLL not locked then that is why i have no t/rx on any band. I also (thought) i read somewhere that D5 should not be touched, this one has a leg cut so again wondering if that could be a problem.
On a brighter note the display is working and so is the menu, getting there slowly but surely, thanks in anticipation.
|