UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

oldticktock · 20th Dec 2009, 7:23 pm

As it stands now after changes suggested, with the 510k resistor on pin 5 nothing and the avo trick does not yeild anything, with it back on 4 you get the fade off and the avo trick works.

I'm off outside to stick my head in the foot of snow and suggest the locals take a free kick at my backside for the next hour or so. I've been at this all day and i'm sure you are all bored by a newbs attempt. Shame as i like this set but someone must have played before me

with 510 on pin 4, this is where it is at the moment not as the drawing shows

valve 42 readings

pin 1=about 24
pin 2=255
pin 3=320
pin 4=45
pin 5=35
pin 6=0

20th Dec 2009, 7:23 pm	#83
oldticktock Retired Dormant Member Join Date: Nov 2009 Location: Weardale, UK. Posts: 1,981	Re: Newb Stumped on a Derwent As it stands now after changes suggested, with the 510k resistor on pin 5 nothing and the avo trick does not yeild anything, with it back on 4 you get the fade off and the avo trick works. I'm off outside to stick my head in the foot of snow and suggest the locals take a free kick at my backside for the next hour or so. I've been at this all day and i'm sure you are all bored by a newbs attempt. Shame as i like this set but someone must have played before me with 510 on pin 4, this is where it is at the moment not as the drawing shows valve 42 readings pin 1=about 24 pin 2=255 pin 3=320 pin 4=45 pin 5=35 pin 6=0 Attached Thumbnails Last edited by oldticktock; 20th Dec 2009 at 7:51 pm.