Re: Akai GX365
Hi,
Between the bias oscillator output board and the record head is relay R401 on the track selector board. On a few occasions have had to clean the contacts, or replace relay in severe cases. Also the bias appears to be routed through track selector switch which may have an open circuit. In both instances no head load gives high output with little or no adjustment level.
Try swapping over the bias output connections on pins 8 and 9 of the bias oscillator board to help confirm location of fault.
Rich
__________________
To an optimist a glass is half full; a pessimist half empty; an engineer twice as big as need be!
|