View Single Post
Old 10th Jun 2019, 5:49 pm   #15
Refugee
Dekatron
 
Refugee's Avatar
 
Join Date: Apr 2012
Location: Worksop, Nottinghamshire, UK.
Posts: 5,549
Default Re: Modding a 24V PSU to 12V.

A 12 volt power supply with that rating needs plenty of gain with a feedback loop around it and as little unregulated voltage above the target output vpltage.
Converting a 24 volt power supply in this way is just not practical.
A float charged battery may well do the job if the overral demand for power will not run it down during usage at full power. It depends on the duty cycle requirement of the load.
Refugee is offline