View Single Post
Old 14th Jun 2019, 11:53 am   #1
dejayaGalloway
Diode
 
Join Date: Jun 2019
Location: Castle Douglas, Galloway, Scotland
Posts: 2
Default Sansui SC-3330 - No rewind or FF - No Sound

Hi folks,

First-time poster - so please feel free to keep me right!

I have a Sansui SC-3330 which I picked up recently.

It looks in fabulous condition inside & out - but it has a couple of issues.

1 - While the tape appears to play fine in PLAY mode, there doesn't seem to be anything getting sent to the audio outs or the VU meter. Even a noisy tape, volume at full, nothing registers on the outputs or the meter.

2 - While PLAY mode seems OK mechanically, FF and REW fail to move the tape at all. The little bars engage to lock the tape in place and a motor / pulley / belt kick into action at the back - but nothing happens up front.

I'm far from an expert but the belts I can see / access all feel OK to me.

I have made a short video which hopefully shows both these issues:

https://photos.app.goo.gl/8Eqxuc7dv2iT15zm9

Any thought or help much appreciated!
dejayaGalloway is offline   Reply With Quote