Quote:
Originally Posted by Paul JD
Difficult to tell from the photo but the modern pot in your second pic appears to be a "miniature" 16mm dia pot designed to fit a 7mm dia mounting hole. If you look for a 24mm dia pot that will be designed to fit a 9.5mm mounting hole and should fit the original hole. The locking tab not lining up should not be a problem, just bend the tab back or break it off on the new pot, as long as the nut is done up tightly it shouldn't work loose.
|
I will look for something suitable but I’ll probably need to get the lug to fit if it’s a switched pot - it’s bound to work loose if it’s being switched on and off.
It just occurred to me that an option would be to simply remove one of the two input pots, shift them all along, and put a switch in the vacant “pot hole”. The two channel feature was useful for a typical stereo input though.