View Single Post
Old 14th Oct 2018, 11:03 pm   #3
jascha
Hexode
 
Join Date: Nov 2005
Location: Kent, UK.
Posts: 332
Default Re: Ferrograph 3A/N.. some help please

Thanks for your reply. The Series 3 counter is driven by 2 belts that are connected by a pulley mounted on the deck itself, therefore connecting the counter to the motor.

I think I'm realizing that the circuitry is probably identical but if not it should be easy to figure out if resistances are out of tolerance, Capacitors will be changed anyhow as they are very old by now so worth changing them.
I measured the counter belt and the circumference measured around 25cm.
jascha is offline