UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

David G4EBT · 31st Jul 2019, 9:06 am

Here's how the speaker is held in place with four brackets.

The picture was annotated to show the screw threads for securing the chassis to the cabinet, and to fix the back panel, but the speaker mounting brackets which clamp the speaker in place can be seen. If a smaller speaker is preferred, then as has been said, you'd need to make a mounting board from thin plywood, MDF etc.

Hope that helps a bit.

31st Jul 2019, 9:06 am	#6
David G4EBT Dekatron Join Date: Feb 2003 Location: Cottingham, East Yorkshire, UK. Posts: 5,767	Re: Bush DAC90A Speaker Question Here's how the speaker is held in place with four brackets. The picture was annotated to show the screw threads for securing the chassis to the cabinet, and to fix the back panel, but the speaker mounting brackets which clamp the speaker in place can be seen. If a smaller speaker is preferred, then as has been said, you'd need to make a mounting board from thin plywood, MDF etc. Hope that helps a bit. Attached Thumbnails __________________ David. BVWS Member. G-QRP Club member 1339.