UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

ppppenguin · 31st Mar 2010, 4:53 pm

At this stage you have only energised pins 4 and 5 of the PY82s. They will have AC voltages on them. I assume you mean V9, not V19, using the Bush service info.

All other pins are irrelevant at this stage. When you apply power to the HT side then you'll get AC mains at pin 9 and rectified DC at pin 3. All other pins are irrelevant.

To add confusion, the fuse numbering is different between the Trader and Bush circuits. To avoid confusion can we please now work exclusively with the Bush data. It's freely available from Jon's website for others to help too.

31st Mar 2010, 4:53 pm	#92
ppppenguin Retired Dormant Member Join Date: Dec 2003 Location: North London, UK. Posts: 6,168	Re: Tv62 At this stage you have only energised pins 4 and 5 of the PY82s. They will have AC voltages on them. I assume you mean V9, not V19, using the Bush service info. All other pins are irrelevant at this stage. When you apply power to the HT side then you'll get AC mains at pin 9 and rectified DC at pin 3. All other pins are irrelevant. To add confusion, the fuse numbering is different between the Trader and Bush circuits. To avoid confusion can we please now work exclusively with the Bush data. It's freely available from Jon's website for others to help too.