Thread: Aurora fault.
View Single Post
Old 1st Aug 2018, 11:48 pm   #10
tubesrule
Hexode
 
tubesrule's Avatar
 
Join Date: Jul 2004
Location: Michigan USA
Posts: 325
Default Re: Aurora fault.

Graham,
Yes it's a surface mount device. It will be right along side the connector, closest to the back edge of the board. It may be marked 75- something. You do need to follow standard static procedures like grounding yourself before opening the case and working on the board. You should be able to easily check the resistor with a meter.

Darryl
__________________
Aurora video standards converters: http://www.tech-retro.com/Aurora_Design/Video_Home.html
tubesrule is offline