UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Station X · 21st Jun 2017, 10:40 pm

As per the diagram in post #147 and the under chassis drawing in the service sheet I should think.

Call C30's leads Y and Z.

One side of the mains connector would have C30 lead Y and the voltage selector lead connected to it.

The other side of the mains connector would be wired to S3.

The other side of S3 would have C30 lead Z, Wire D and tag E connected to it.

21st Jun 2017, 10:40 pm	#152
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,289	Re: Bush A.C.91 As per the diagram in post #147 and the under chassis drawing in the service sheet I should think. Call C30's leads Y and Z. One side of the mains connector would have C30 lead Y and the voltage selector lead connected to it. The other side of the mains connector would be wired to S3. The other side of S3 would have C30 lead Z, Wire D and tag E connected to it. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.