Thread: VCM 163 No.1. Problem while calibrating
View Single Post
Old 26th Nov 2020, 9:24 am   #7
HBWOODY
Pentode
 
Join Date: Mar 2020
Location: Bodmin, Cornwall, UK.
Posts: 212
Default Re: VCM 163 problem while calibrating
When I test a valve I get the correct readings on the M1 meter but nothing on M2.
Did an ohms check across pin1 and pin 2 on thew amplifier board and got a reading of 12ohms.
HBWOODY is offline