UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

edteach · 22nd Oct 2020, 5:38 pm

This is a Kenmore 50s fan. Its a three speed and the speed coil is in the head or stater. The wiring was bad so I did not get to write down the way they hook up. I put color shrink tub on the four wires to make it easy. So I did an ohms reading on the four to the head. They are as follows
Red to black 5.5
Red to green 24.6
red to white 36.5
black to green 20.7
black to white 32.5
green to white 13.5

So I am not sure how to figure out from here what one is neutral, high low medium. Thanks for any guidance.

22nd Oct 2020, 5:38 pm	#1
edteach New Member Join Date: Oct 2020 Location: Toronto, Ontario, Canada Posts: 1	Help wiring a vintage fan. This is a Kenmore 50s fan. Its a three speed and the speed coil is in the head or stater. The wiring was bad so I did not get to write down the way they hook up. I put color shrink tub on the four wires to make it easy. So I did an ohms reading on the four to the head. They are as follows Red to black 5.5 Red to green 24.6 red to white 36.5 black to green 20.7 black to white 32.5 green to white 13.5 So I am not sure how to figure out from here what one is neutral, high low medium. Thanks for any guidance.