Quote:
Originally Posted by Steve_P
Suppose it's partly going to deck through the transformer?
Cheers,
Steve P.
|
Ah! - Now I did do a simple continuity test on some of the dubious bits of bared wire protruding from the T2. I say dubious, as they were devoid of any form of insulation, and not covered with the red varnish (?) that T1 and the other side of T2 has. Between those three points and the chassis there was complete continuity.
If you go back to post No.20 and check out the thumbnail furthest right, you will see over the top of the smoke burnt bracket, the tips of bare metal from where I made that continuity test to chassis.