View Single Post
Old 15th May 2012, 6:03 pm   #4
Join Date: Jul 2006
Location: Bedfordshire, UK.
Posts: 196
Default Re: Labgear CM 6052/CB PAL Colour Bar Generator


Thanks for speculating about how the extra output on the colour bar generator might be used, but Rich has subsequently given us a more definitive answer.


I have looked at the output from the extra socket on my oscilloscope and it certainly appears to be sync pulses only. The vertical pulses have an amplitude of about 5 volts and the horizontal ones much less, but as you say enough to act as a trigger signal.

I would very much like to have a copy of the service manual and will send you a PM.

Thanks and best regards,

Ricardo is offline