UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Station X · 21st Dec 2009, 9:58 pm

That's useful. (The sketch in post 177 that is) Is there a direct connection between pin 2 (anode) of the 42 and the top inner terminal of the output transformer or does it go via the tone control?

I assume that the "speaker loom" now carries just two wires to the speaker and the other pins are redundant?

21st Dec 2009, 9:58 pm	#179
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,289	Re: Newb Stumped on a Derwent That's useful. (The sketch in post 177 that is) Is there a direct connection between pin 2 (anode) of the 42 and the top inner terminal of the output transformer or does it go via the tone control? I assume that the "speaker loom" now carries just two wires to the speaker and the other pins are redundant? __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.