UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - MK14 programming interface

Timbucus · 22nd Apr 2019, 10:46 pm

Yes just checked reads 119.5 ohms with a meter

Sounds like a good offer - interesting if you get the same result with one of them in which case we need to look further afield - maybe send the chip back to you as well as it has an effect for you if they don’t.

On a lighter note I have patched the programmer into an interface on my conversion of Daver’s fpga MK14 onto my Waveshare Spartan board this weekend!

It downloads and plays segtris fine but moonland failed (as does daver’s Built in copy so probably a vhdl bug) - message also transferred fine as well - no reset on that interface though so does not add to this problem solution...

22nd Apr 2019, 10:46 pm	#68
Timbucus Octode Join Date: Mar 2019 Location: Barry, Vale of Glamorgan, Wales, UK. Posts: 1,363	Re: MK14 programming interface - MK2 Yes just checked reads 119.5 ohms with a meter Sounds like a good offer - interesting if you get the same result with one of them in which case we need to look further afield - maybe send the chip back to you as well as it has an effect for you if they don’t. On a lighter note I have patched the programmer into an interface on my conversion of Daver’s fpga MK14 onto my Waveshare Spartan board this weekend! It downloads and plays segtris fine but moonland failed (as does daver’s Built in copy so probably a vhdl bug) - message also transferred fine as well - no reset on that interface though so does not add to this problem solution...