UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

60 oldjohn · 24th Dec 2017, 4:24 pm

Thank you Lawrence, R13 is shown mounted on the upper tag strip, I presume mounting it on the choke was a production modification, just to confuse me. I will check resistor value when I renew the wire and other 8uf & 16uf 450v caps.
Anyone know of any ill effect by changing the two 50uf 12v caps for two 100uf actually measure 98uf, they are C33 C36 ? set works ok with them but will it stress other parts?

John.

24th Dec 2017, 4:24 pm	#12
60 oldjohn Dekatron Join Date: Dec 2004 Location: East Yorkshire, UK. Posts: 3,987	Re: Murphy A104 Thank you Lawrence, R13 is shown mounted on the upper tag strip, I presume mounting it on the choke was a production modification, just to confuse me. I will check resistor value when I renew the wire and other 8uf & 16uf 450v caps. Anyone know of any ill effect by changing the two 50uf 12v caps for two 100uf actually measure 98uf, they are C33 C36 ? set works ok with them but will it stress other parts? John. Last edited by 60 oldjohn; 24th Dec 2017 at 4:42 pm.