UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

ian_rodger · 21st Dec 2018, 4:53 pm

Sounds like a good Arduino project. An attiny85 (8 pin chip) and an LED might be all you need assuming it can run an output at 300 Hz with the Arduino code overhead. Should be a simple programme. If I have time this weekend I'll test that for you and report back.

21st Dec 2018, 4:53 pm	#7
ian_rodger Pentode Join Date: Jan 2015 Location: Greenock, Inverclyde, UK. Posts: 161	Re: Turntable Stroboscope Sounds like a good Arduino project. An attiny85 (8 pin chip) and an LED might be all you need assuming it can run an output at 300 Hz with the Arduino code overhead. Should be a simple programme. If I have time this weekend I'll test that for you and report back.