UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

DMcMahon · 3rd Jan 2020, 5:25 pm

Hi All,

As always thank you for the various inputs. After email discussion with SDS (and revisiting the Service manual) I now realise that I was getting the Flywheel mixed up with the Drive wheel. The Flywheel is the Brass wheel, the Drive wheel is the Alloy wheel with capstan shaft + rubber bonding.

New drive belt has been tried with no change in noise level.

David

3rd Jan 2020, 5:25 pm	#8
DMcMahon Dekatron Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 6,604	Re: Uher 4000 Report Monitor Noisy Hi All, As always thank you for the various inputs. After email discussion with SDS (and revisiting the Service manual) I now realise that I was getting the Flywheel mixed up with the Drive wheel. The Flywheel is the Brass wheel, the Drive wheel is the Alloy wheel with capstan shaft + rubber bonding. New drive belt has been tried with no change in noise level. David