View Single Post
Old 12th Jul 2018, 12:25 am   #12
jonnybear
Octode
 
jonnybear's Avatar
 
Join Date: Nov 2010
Location: Cullompton, Devon, UK.
Posts: 1,434
Default Re: Battery tag spot welder.

Just a quick follow up, the secondary windings of the microwave transformer will have to be cut out and drilled (pig of a job)removing every winding except the primary one, then I used 10mm2 tri rated cable as it is easier to use, double it up to give 2 turns in parallel = 20mm2 on the bobbin leaving plenty of length to connect to the choc connectors, try to avoid any joints as they can give you a hot spots, I have done a rough thumb nail of the circuit will do a better drawing later if required.
John
Attached Thumbnails
Click image for larger version

Name:	DSC06612.jpg
Views:	316
Size:	45.1 KB
ID:	165930  
jonnybear is offline