View Single Post
Old 15th May 2019, 5:05 am   #1
Louis-Philippe
Diode
 
Join Date: Sep 2018
Location: Québec City, Québec, Canada
Posts: 5
Default FT101E -100 volts DC?

Hello, I have a Yaesu FT101E and I always wondered why Yaesu indicte on its panel rectifier (PB-1076b) an output at -100 volt DC. In reality it produces a voltage of more than -160 volts. In the schematic of the service manual, the output -100 volts DC and 160 volt DC are produced by the same voltage doubler. is this normal?

Louis Philippe. 73 VE2PBC

Last edited by Station X; 15th May 2019 at 8:55 am.
Louis-Philippe is offline